|
| |
| |
|

By Doron Markowitz
Hello again, recently there has
been much interest in the variety of guitar pickup
selections on the market. This is a re-print of a
coumn from last year that will share some timely
information to assist in your selection. I’m
going to go into a little more detail about the different
types of pickups that you find on the many different
guitars out there. The fact is, truly no 2 guitars
are alike, even those that bear the same name, due
to different grains in the wood, etc. Well, the differences
between 2 different guitars, from 2 different guitar
companies, that use very different building methods
are even more stark. For example, a Gibson Les Paul
and a Fender Stratocaster play, feel, and sound completely
different from each other. Why is that? Well, we’re
going to find out.
Since the guitar
was first invented, luthiers have been trying to
improve upon the design, and still do to this day.
It’s the “better mousetrap” syndrome.
Don’t try and look up that term, I just made
it up. Haha. Anyway, in the early part of the 20th
Century, the Gibson guitar company put a single coil
pickup on an archtop guitar, called the ES 150 guitar,
and suddenly the guitar could be amplified. This
guitar was made famous by one Charlie Christian and
the pickup that was used was nicknamed the Charlie
Christian pickup. What exactly is a pickup, you ask?
Well, basically a pickup consists of a magnet that
has very thin copper wire wrapped around it, several
thousands wraps, that is housed inside some kind
of form, and wired either to a volume and tone circuit,
or directly to a jack. The types of magnets, coils,
and even bobbin materials, are what make each pickup
sound unique and offer so many tonal options. This
is where it’s imperative to really use your
ear in determining if the guitar you want is ideal
for your particular playing style and tastes.
Let’s talk,
for a moment, about the different magnets used in
the construction of pickups. This is important because
pickup magnets have differing magnetic strengths
and therefore require different height requirements
in conjunction with the strings. Set certain pickups
too close to the strings, and the intonation and
sustain affected. Basically, there are 3 types of
magnets used in pickups today. They are AlNiCo, Ceramic,
and Neodymium. Let’s look at Alnico first.
It’s called AlNiCo because it’s made
of a combination of Aluminum, Nickel, and Cobalt.
The most common that you hear about is Alnico 5 and
pickups that have Alnico 5 magnets are usually sought
after because of their vintage tonal quality. However,
the aforementioned Fender and Gibson companies used
Alnico 5 magnets in very different easy from each
other. Vintage spec Fender single coil pickups actually
have 6 individual Alnico 5 magnets as the polepieces.
Therefore, the magnetic pull is very strong, which
is why those pickups have to sit deeper into the
body, or much lower from the strings, than say a
Gibson PAF humbucker. Gibson uses an Alnico 5 bar
magnet between the coil bobbins and the baseplate
of the pickup, and each coil has a row of 6 metal
polepieces that touch the bar magnet. One row of
polepieces is actually height adjustable. This arrangement
actually spreads the magnetic field over a wider
surface, therefore making it easier to have the pickup
closer to the strings than a Fender single coil without
intonation or sustain problems. Of course, there
are other Alnico magnets being used, and they are
numbered as Alnico 2 and Alnico 3. Basically, they
have a somewhat weaker magnetic pull and pickups
that use these magnets do so to emulate the sweet
tonal characteristic of a 50’s Gibson PAF humbucker
whose magnetic pull has weakened over time. Gibson
also makes a single coil pickup called a P90 which
is considerably bigger than a Fender single coil,
and sounds fatter because of the construction. |
 |
 |
 |
 |
Gibson PAF with the cover |
an SG that has a P90 in the neck and a Dimarzio humbucker
in the bridge position. showing what a typical humbucker
looks like without the cover |
the polepieces of a typical Strat pickup, in a pickguard,
whether Alnico or with ceramic bar magnet |
underside of a typical Strat pickguard showing the
individual Alnico magnet polepieces. |
OK, ceramic magnets
are used in certain pickups for a more modern sound,
due to it having a more compressed distortion capability
and is a favorite with many heavy metal guitar players.
It’s not impossible to get a smooth tone out
of ceramic magnet pickups, but they tend to just
lend themselves better to harder styles of rock music.
All pickups that have ceramic magnets, have them
either glued to the underside of the housing, as
on Fender-style single coils, or mounted between
the coil bobbins and baseplate in a Gibson style
humbucker.
The third type is
Neodymium, or Neo. Neo magnets are perhaps the most
powerful magnets on the market today, and therefore
their use in guitar pickup construction isn’t
too common, but there are makers who use them. They
are usually used as speaker magnets, but you will
find guitar pickups that use them in specific applications.
OK so now that we
know the basic differences in the types of magnets
used, how do you determine what type you have? Well,
if you have a Strat-style guitar, the easiest thing
to do is take off the pickguard and look at the underside
of the pickups. If you only see 6 polepieces and
no bar magnet, then your single coils are Alnicos.
If you see a bar magnet, then it’s ceramic.
If you have a Gibson style guitar, it can be hard
to determine what the bar magnet is if there isn’t
a sticker on the underside of the baseplate. If it’s
a real Gibson humbucker, the best thing to do is
cross reference the model number of that pickup with
the specs on the Gibson website to determine the
magnet type. |
 |
 |
 |
The
ideal heights for 3 Alnico Strat pickups compared
to string heights |
Underside
of a typical PAF
Alnico 5 Gibson humbucker |
the
underside of a typical single
coil pickup with a ceramic bar magnet. |
OK well, when it
comes to setting the proper distance between pickups
and strings, the first thing you want to do is lower
the pickups as far as you can without them falling
off the mounting screws. After you do that, starting
with the bridge pickup, begin to raise the pickup
to where it sounds good to your ear. Of course, your
guitar is plugged in and the amp is set on the clean
channel, right? Make sure that you actually hold
both “e” strings down the highest fret
while doing these adjustments. That way, you will
be able to see, more accurately, what the real distance
is when the strings are fretted at the highest frets,
not just based on open strings. As you raise the
bridge pickup, pluck the fretted string. If the note
starts to warble, then the pickup is too high and
you have to lower it until the warbling stops. Once
you find that “sweet spot”, move on to
the middle pickup (if your guitar has one) and then
the neck pickup. Their adjustments are actually slightly
different in that the goal is to get their output
levels, or volumes, to match that of the bridge pickup.
The last thing you want is your neck pickup being
much louder than your bridge pickup. Output balance
between all pickups is essential for a balanced sounding
guitar. Now you’ll have a guitar that sounds
good, with a consistent output level between all
pickup positions, and since you’ve done a setup
on it, thanks to last month’s article, it plays
great as well.
OK so it looks like
I went longer on the history of guitar pickups and
the basics of pickup construction than I expected,
so tune in next month for my discussion on the differences
between Gibson-style, Fender-style, and locking bridges
and how to properly set them up. Once again,
thanks for reading my column and remember no task
worth accomplishing is ever achieved if not pursued
with fierce dedication. Believe in yourself, and
make happen that glorious noise called music! Until
next time, remember, there is nothing you can't do
if you set your mind to it! Cheers! |
|
D
Guitars Miami has been a full-service repair and manufacturing
shop since 1988 serving South Florida with the highest
attention to detail one can expect. No job too big or
small. Whether you need pickups replaced, new frets,
a total refinish, broken head stock rebuilt, or just
want a custom crafted instrument built to your exacting
specifications, D Guitars Miami can do it all, from acoustic,
to electric, guitar or bass. (305) 896-1811 dguitarsmiami@yahoo.com |
| |
|
|
|
|