By Doron Markowitz

The original Red Special

Hello again and welcome to another installment of Luthier's Corner. This month, I'd like to discuss one of my personal favorite topics: The Red Special built by Brian May. More specifically, I want to discuss how unique its construction is, and how it’s possible to actually use the very unique design of Brian’s original build, and craft your own variation(s) of it. First, I’ll briefly discuss how Brian and his dad built the guitar in the early 60’s, using materials and methods not common to guitar construction, and then give descriptions of my 6 personal Red Specials, each built in a uniquely different manner.

The original Red Special was built by Brian and his dad, Harold, from 1962-1964, and it took about 18 months to complete. Unlike the traditional methods, and materials, that most guitars are built using, such as maple, ash, alder or mahogany for the body and neck, the Mays used rather unconventional materials. The body was constructed, primarily, using blockboard as the main frame, red oak in the center core, for stability, and mahogany veneer for the top, back and sides. The white binding was made using shelf stripping. And the body had very strategic hollow cavities cut for a semi-acoustic quality.

Everything, except the Burns trisonic pickups, the pots, jack, fretwire, and tuners, was made by the Mays. Brian actually made the trem tailpiece, and roller bridge himself. The trem springs were sourced from a pair of motorcycle valve springs. The neck was actually carved from a 100 year old mahogany fireplace mantle that a neighbor had thrown out. And the fingerboard is oak, painted black. Even the mother of pearl dots were buttons sourced from his mother’s sewing basket, which he then cut to fit! The scale length is 24”, with 24 frets, and a 7.25” fretboard radius. As you can see, these materials are not common to guitar building.

But that guitar has lasted for 50 years, and was only once restored back in the mid 90’s! Not bad for a father and son team working in a spare room in the house, eh? That guitar is legendary!

Now that you know a little about how Brian and his dad built the original, here are brief descriptions of my 6 Red Specials, showing how you can take any original, or established, guitar design, and create your own variation that suits your needs. Take a look at the pictures to see the differences as well as the similarities between them and the original.


#1 Build date- 7-21-03.

Neck through body construction w/ correct semi hollow cavities. Makore neck core w/ zebrawood, purpleheart, and poplar wings. Maple fretboard. 1/4" purpleheart dot inlays. Wonderbar tremolo.

Paduak pickguard and truss rod cover stained dark. Dimarzio Brian May neck and middle & Dimarzio SDS-1 bridge single coil pickups with chrome covers. classic RS wiring w/additional series/parallel switching. chrome bell knobs.


#2 Build date- 6-27-04.

Correct paddle extension bolt in neck. Neck- Makore wood. Rosewood fretboard w/white oak binding, 1/4" abalone dot inlays.

Body- correct semi hollow cavities. 2 piece 1/4" Paduak top, red oak body frame and core, mahogany side veneer, 2 piece 1/4" walnut back, pearloid top and back binding, Jazzmaster tremolo, roller tuneomatic bridge, 3 Burns Trisonic pickups wired to my modified classic RS wiring w/series/parallel switching. old chrome Vox knobs. black plastic pickguard, truss rod cover, and trem plate


#3 Build date- 9-5-04.

Set neck design. purpleheart neck w/mahogany rear strip, mahogany and purpleheart headstock veneers, bubinga fretboard w/ 4 layer maple and mahogany binding, 1/4" pearl dot inlays. Body- correct semi hollow cavities.

MDF body frame and core w/ Red Oak central core, 1/4' Lauan plywood arched top w/catseye soundhole and flat back covered w/various swatches of exotic wood veneers and the sides, pearloid top and back binding, Wenge archtop-style pickguard, Carvin M22N neck humbucker, Trisonic middle pickup, and Trisonic pair at the bridge, all wired to my hybrid RS wiring with series/parallel, and coil taps, 60's Japanese Bigsby-style vibrato trapeze tailpiece, roller tuneomatic bridge, Wenge wood bell knobs.


#4 Build date- 6-27-05.

Set neck RS/Danelectro Convertible/Gibson archtop hybrid design. 2 piece Cherry wood neck, 9 piece fretboard of maple, wenge, zebrawood, and paduak, faux-maple Formica headstock veneers, 1/4" black dot inlays.

Body- completely hollow archtop design w/suspension bridge bracings. body frame and bracings cut and carved from 1 solid block of 2 piece Cherry wood, faux-maple masonite arched top w/catseye soundhole and back, and pickguard, piezo bridge crafted from Cherry wood w/Paduak saddle, Danelectro Convertible tailpiece, Yamaha P-90 neck single coil and Dimarzio DLX-1 soapbar bridge humbucker, both under dogear covers, Bartolini active piezo blender w/simplified RS wiring, including bridge coil tap. 3 maple bell knobs.


#5 Build date- 9-11-05.

47 pieces of wood construction.correct paddle extension bolt in neck w/neck tilt. Neck- 3 piece Cherry, paduak, and Cherry woods. 11 strip fretboard of rosewood, maple, bubinga, and paduak w/maple binding, 1/4" white clay dot inlays.

Body- Correct semi hollow cavities. many pieces of exotic and domestic woods including red and white Oak, Purpleheart, Walnut, Paduak, Bubinga, Mahogany, etc, body frame and core, 1/8" top and back of various exotic and domestic woods, pickguard, tremplate, and truss rod cover all made from same woods for matched patterns. Cream and wood veneer body bindings, 3 Burns Trisonic pickups w/ my Ultimate RS wiring w/ Master Switch & series/parallel switching. Wonderbar tremolo. Bubinga bell knobs.


#6 Build date- 6-12-12.

RS Tribute Production Prototype- dedicated to my father. correct paddle extension bolt in neck w/neck tilt. Neck- 3 piece Butternut, Walnut, and Butternut woods, Wenge fretboard, 1/4" pearl dots. Body- Correct semi hollow cavities. 2 piece 1/8"

Bubinga wood top w/ catseye soundhole, 1/2" poplar and 7/8" Bubinga body frame and core, 1/4" Lauan plywood back, 3 ply white/black/white body bindings, w/ additional Wenge veneer in the top binding for 5 ply total, 3 Trisonic pickups w/ my Ultimate RS wiring w/ Master Switch & series/parallel switching. modified Mustang-style vibrato, Wilkinson roller bridge, cream plastic pickguard, top trem plate, and truss rod cover. recessed Bubinga rear trem cover, Bubinga bell knobs.


All my Red Special guitars are 25.5" scale length w/ 12" fretboard radius, and 24 frets.

Well, I hope you found this month’s article informative and enlightening. Once again, thanks for reading my column and remember no task worth accomplishing is ever achieved if not pursued with fierce dedication. Believe in yourself, and make happen that glorious noise called music! Until next time, remember, there is nothing you can't do if you set your mind to it! Cheers!


D Guitars Miami has been a full-service repair and manufacturing shop since 1988 serving South Florida with the highest attention to detail one can expect. No job too big or small. Whether you need pickups replaced, new frets, a total refinish, broken head stock rebuilt, or just want a custom crafted instrument built to your exacting specifications, D Guitars Miami can do it all, from acoustic, to electric, guitar or bass. (305) 896-1811 dguitarsmiami@yahoo.com
 
blog comments powered by Disqus
 
 
 
Bookmark and Share
© Copyright since 2011 - Legal Notices