|
By Samantha L
Barrett
Setting up for a concert can be one of the most stressful aspects of show
day. Whether there is one band or multiple bands, each band will have a different
method that they have created and each band will have different instrumental
needs. To get the set up for a show done efficiently, use the following seven
steps.
Step one: Know what the band(s) are expecting. Prior to the show date, have
a meeting with the band(s) about what instruments they have, what equipment
they normally use, and what they expect to bring. Make sure to write all of
this down to avoid future confusion or conflict.
Step two: Coordinate with the chosen sound technician. Unless you are running
sound yourself, chances are you will have hired a sound engineer or technician
to run the sound the day of a show. Make sure that he or she knows of any special
or unique requests from any of the bands, how many bands there will be, and
what equipment will be used. If the engineer is not familiar with certain pieces
of equipment, be sure to find someone that can help with that aspect of the
day.
Step three: Rent proper equipment. Depending on the venue and the sound engineer
being used, it may be necessary to outsource to another company to get the
proper equipment for the day. Some venues are equipped with all of the necessary
equipment. Some sound engineers prefer to bring equipment that they know how
to use and will bring it. If not, they may suggest a vendor that can provide
this equipment for the day of the show. Be sure to take into account that this
will be an extra fee.
Step four: Double check the bands' requirements. Nothing is worse than realizing
that a band needs five microphones and there are only four available. Make
sure that there are drum microphones, handheld microphones, amplifiers, and
all of the necessary wires for each band. Allow for backup equipment in case
of technical difficulties. Make sure that the equipment is compatible with
the sound system being used.
Step five: Have bands arrive hours in advance for set up. Give each band a
specific time to be at the venue to set up their equipment. Allow each band
to have about thirty minutes. The most effective way to assure that set up
and break down are quick through a multi-band show is to have the drummers
set up their kits around the stage. Have the last band's drummer set up his
or her kit backstage first and work backwards. That way, the drums will be
set up in order allowing a smooth transition on and off the stage. This has
been proven to take at least fifteen minutes off of set up and break down time
in my experience.
Step six: Do an inventory of the instruments and equipment at the venue on
show day. As redundant as it may sound, the day of a show can be stressful
and cause band members to forget their instruments or there could be a lost
microphone in the mix. Have local musicians and instrument supply stores on
call in case of a crisis.
Step seven: Do a full sound check. Each sound engineer has a different method
of doing this. I have observed a sound engineer that only did a sound check
for the first band and then another engineer that did sound check in between
each of the sets. Having only one sound check seems risky, but the results
are ultimately the same. As long as the sound is adjusted to fit the venue,
it is easy to adjust levels during a set without ruining it. Make sure that
the drums do not overpower the vocals and that the guitar does not get over
powered by the bass. All instruments should be heard, but should not overpower
the vocalist.
Once sound check is complete the show is ready to begin. The process of assuring
sound is perfect for the day of the show starts at least a week prior to the
show, starting with knowing/learning about band expectations, coordinating
with the sound technician or engineer, renting the proper equipment, double
checking that the bands' needs are met, having bands arrive early for set up,
doing an inventory of instruments and equipment, and finally doing a full sound
check to result in a great show. By following all of the above steps, the sound
at the show will be top notch and the show day will be much simpler.
|