|
By Bjorgvin Benediktsson
1. Being late - If you are the engineer show up early to make sure everything
is working properly. If you're the musician don't make the engineer wait around
for you.
2. Not changing the strings of your guitar - Scummy strings can't be fixed
in the mix.
3. Not knowing your parts - It's a waste of time and money to come unprepared.
4. Singing with a cold - Reschedule your vocal session if you know you can't
perform.
5. Giving a lackluster performance - Not everything can be fixed in the mix.
6. Being disrespectful - It goes without saying, the engineer is your best
friend. So treat him well.
7. Recording for recording's sake - Similar to not knowing your parts. If
you are just piling on parts without a clear direction, it's still a waste
of time and money.
8. Recording a badly sounding drum-kit - Replace the drum heads and tune your
drums. It'll be worth it.
9. Not having a plan - Make sure you know what you are going to do during
the session. A good plan goes a long way.
10. Don't cram too much into one session - Don't try to record drums, bass
and orchestra in the same three hour session. Recording takes time, so plan
accordingly.
11. Skipping the warm-up - Singing first thing in the morning is hard isn't
it? So is nailing a 200 bpm solo without warming up your fingers.
12. Recording too hot - Better be safe than sorry. Record at lower digital
levels to avoid clipping.
13. Not being in tune - I'm sorry. It's a pet peeve, but people are prone
to forget to tune their instruments.
14. Not having enough cables - Say you're doing a location recording and you
didn't bring enough cables. It's not only a huge waste of time to go and get
what you forgot, but it also reflects poorly on you as a professional.
15. Not being familiar with how things
work - If you are working with a new
piece of equipment, or working at a new studio then it's imperative you don't
look stupid when you're trying to figure out how things work.
16. Fix it in the mix? If you know you can (and will) fix it in the mix, then
use this sentence. If you know you can't fix it, don't lie. It's one of the
more common lines in the audio industry.
17. Communicate - Even though engineers and artists are
a closely bred species they do not share all the lingo that's inherent to
them. If the engineer isn't a musician then getting too musical will be confusing.
Likewise with an engineer getting to "audio-engineer-y."
18. Don't do drugs - I know what Bill Hicks said about drugs and music, but
it's usually not a good idea to be stoned or drunk during a recording session.
19. Bring extras - Extra strings, extra picks and extra drum sticks for instance.
Some things break and it's better to be prepared when (not if) that happens.
20. Break the session into chunks - It's better to record two energetic four
sessions than one long eight hour one where the last two hours people are tired
and uninspired.
21. Not being comfortable - As an artist, much of your performance is based
on how you are feeling when you are recording. If you don't feel comfortable
then your playing will suffer.
Conclusion
Think about it, there are just as many things you need
to NOT do in order to get that great recording down on "tape".
Just like it's all about following the right guidelines for recording, engineering
and musicianship; there are also some pitfalls you need to avoid.
Bjorgvin Benediktsson is an audio engineer and writer. He is an Alumni from
the SAE Institute and has been working in the audio industry since 2006. He
has written about audio and music for blogs and magazines since 2006 and has
published books on audio recording and mixing. He writes about music production
on his blog. Check out more of his writing right here on Audio Issues
|