|
By Bjorgvin Benediktsson
Us guitarist like hearing our guitar sound amazing in a mix. We want it to
be the loudest instrument, and routinely have fights with our singers about
what the main instrument in a song really is.
Is it the vocal? Or is it the amazing guitar lead that's all around the track?
We sometimes like to think it's the latter, but that's up for debate. We like
the mixing engineer to think about the guitar mixing first, the rest of the
song second.
Since I play and sing I have inner turmoil with myself every time I'm doing
my guitar mixing. I always want the guitar to sound interesting, but I don't
want it to crowd up the track.
I like my guitar lines as much as any guitarist does, but as a mixing engineer
you have to be aware of all the elements of a track. That's why I've brainstormed
some good starting points to make your guitar mixing sound amazing.
1. Filter Out the Low End
Guitars have their character frequencies in middle frequencies. Their lower
end sometimes competes with the bass guitar muddying up the track. A good trick
to get rid of this clash is to filter out the lowest frequencies of the guitar
with a high pass filter EQ.
Filter it in solo until you begin to filter out the fundamental frequencies,
then back it off a bit. If the guitar still clashes with the bass guitar when
you play them both together, filter out a little bit more. Remember that instruments
have to sound good together, and that sometimes means making them sound bad
soloed.
2. Add Modulation for Depth
Modulation effects such as chorus and flangers can add an interesting character
to your guitar sounds. Being really subtle on the modulation can be really
useful to add a little bit more space and depth to the instrument without making
it into an effect.
3. Add a Stereo Delay
Adding a nice stereo delay can help widen the guitar sound. With a 100 ms
delay and one repeat you can achieve a nice doubling effect that stands out
just enough, but still sits well in the mix.
4. Add Reverb and Pan it
Send your guitar track to a mono reverb and then pan your reverb to a different
side. It creates a sense of space around the instrument without drowning the
guitar in reverb.
5. Find the Character Frequency
Every guitar has a certain character frequency that makes the sound of it
just jump out at you. With a parametric EQ, boost a few dB's and sweep around
the mids until your guitar comes to life. Then shape your curve accordingly
until it sounds just right.
6. Don't Overdo the Distortion
Too much distortion can really get in the way of a clear mix. Poor choice
of distortion results in poor guitar mixing. You want enough distortion so
the guitar sounds powerful and... well distorted, but not that much that all
your notes bleed into a pile of unintelligible fuzz.
7. Filter Out the High End
Just like with filtering the low end, the high end can be filtered out as
well. Of course this depends on the guitar part itself, but because the guitar
is such a mid-range instrument, sometimes you can get away with filtering out
quite a lot of the high end spectrum.
8. Don't Erase the Mids
Like I said before, guitars are a mid range instrument so getting rid of the
mids kills the fundamental frequencies of the instrument. And by taking away
their mids, other instruments drown out their sound, making them impossible
to hear unless you crank up the volume of them exponentially.
9. Make Way for Other Instruments
Being a guitarist means that you love your guitar. You like the way it sounds
and you love the riffs you come up with. Sadly, most of the time there is more
happening in the mix than just your guitar. So make way for other instruments.
Pan your guitar so it doesn't sit on top of other instruments, cut frequencies
that are clashing with the vocal or just plain turn it down. An equal mix with
all the elements being equally heard is a good mix. Unless your guitar solo
is up next, don't touch that volume button!
10. Color with Effects
Lastly, modulation can be used in more ways than just for subtle depth. Heavy
chorus brings out the eighties in you and some cool tremolo or vibrato can
take your guitar line to the next level. Experiment with different effects,
mix and match and just go for whatever you think might go well together.
Use These Guitar Mixing Techniques Next Time
Being a mixing engineer means being able to mix any instrument, not just your
favorite guitar. Think of your mix as a painting, all the elements have to
go somewhere. If you paint a tree and then paint a house on top, nobody is
going to know that there's a tree behind your house.
The same goes for guitar mixing, if there's layers of guitars on top of everything,
all the other subtle elements aren't going to get noticed. Spread things out,
mix it up, equal up your elements. It'll make for a better song.
Bjorgvin Benediktsson is an audio engineer and writer. He is an Alumni from
the SAE Institute and has been working in the audio industry since 2006. He
has written about audio and music for blogs and magazines since 2006 and has
published books on audio recording and mixing. He writes about music production
on his blog. Check out more of his writing right here on Audio Issues
|